Motherboards: ASUS Rampage III Gene

Hi, after I've had it for many generations AMD Motherboard Review. In this way, ASUS has sent the motherboard of Intel in its Republic of Gamers (RoG) for chipsets Intel X58 force to test it again after the review board family is from both AMD and Intel are already several model. The highlight of the ASUS Rampage III Gene was the addition of features and overclocking. Continues to be a plethora of different version of it, other then that it is in terms of size it was not Gene, this is a motherboard, a m-ATX it is ideal for importing into the chassis size. not very large, very beautiful, the additional features. I have not equally as much as USB3.0 or SATA 6Gb / s, it has to be used as well. The onboard sound chip, it's not unusual here. The carrying capacity of the chip from Creative Supreme FX X-Fi 2 comes with this game. The music is very satisfying indeed. Okay, I see a picture of my motherboard this is good.
Gallery

Packaging of the motherboard, this is still the same manner as other RoG motherboard series is the bright red handle. Paste a label with red eyes in this family the ASUS logo on the outside of the mall also has a compatible CPU. And the chipset as well. And observe that it is found that the motherboard supports the multiple graphics card with a NVIDIA SLI or ATI CrossFireX.

When the box comes out it will be found on the motherboard, ASUS Rampage III Gene is small, m-ATX is even smaller than her size. The mobile features. I absolutely equally.

For the socket the CPU is still a LGA1366 because the chipset Intel X58 because it is the CPU that supports it is a CPU to deploy a packet that the Intel version and a 6-axis super expensive too. For the design of the power that it will be 8 +2 +2 with a 2-phase for QPI 8-phase CPU and memory controller chip and a 2-phase for Northbridge.

Due to its X58 chipset motherboard, this memory to have all 6 channels, so that it can be put to work Tripple Channel RAM RAM to support it with a speed of DDR3 2200/2133/2000/1800. / 1600/1333/1066MHz. And I can put up to 24GB.

And close to the houses that we see through it. Along with a letter labeled as such. This is the feature that it is not Probelt This will allow the user to use a multimeter to measure electrical device in each section so that the amount of light in it. This is ideal for overclocking enthusiasts.

Things take a look at some of my Gene AK it has not disappointed me so fully. The image that we see the SATA 3Gb / s, gray, all six channels. Which is controlled by the chipset Southbridge Intel ICH 10R on the red box to see it as a SATA 6Gb / s dual-channel chip, which is controlled by a Marvell 9128.

At the bottom of the motherboard, then we will see the main keypad. With all three buttons. Gradient from left to right is the MemOK! These properties are used to restore memory clocked a time when we do not have too much power. Or use the Browse button to set the preset overclocking it. Next, we'll see the Start button, which is the on / off regulation. And finally, there is a button to reset it.

Expansion slots for various It has to be sufficiently small board style. This includes all two-channel PCIe 2.0 x16 slots. This supports the NVIDIA SLI and ATI CrossFireX, which is when it will run at x16 like me. The rest of the PCIe x4 slot and PCI are common to each channel.

This is the sound chip of my motherboard. The image can be seen that the chip SupremeFX X-fi 2 a force of Creative.

1x PS/2 Keyboard
1 x S/PDIF Out (Optical)
1 x IEEE 1394a
1 x LAN(RJ45) port
8 -Channel Audio I/O
1 x Clr CMOS switch
1 x ROG Connect On/Off switch
2 x USB 3.0/2.0 ports (Blue)
7 x USB 2.0/1.1 ports (1 port also for ROG Connect)